Elios is proud to present his latest multi-purpose platform: EliMax.

EliMax is a powerful FPGA-based platform and can be used to implement your custom solution. Does not matter if you are working on Embedded Vision, Real-Time Systems or Industrial Automation, EliMax can fit your solution.

In 16 cm2 it embeds the IntelPSG MAX10 FPGA with 2x64Mbit HyperRAM, a 512Mbit QSPI flash, a 2kbit E2PROM and a 6DoF IMU with temperature sensor. On the connectivity side, EliMax integrates a 10/100M ethernet phy, JTAG and a FullSpeed USB which is driven by the ARM Cortex-M3 core. Then, more than 100 High speed general purpose IO pins will support as many extensions you might desire.

The ARM Cortex-M3 core can communicate with the FPGA through a high speed SPI interface and acts as an advanced Power Management Unit for low-power applications.

If this is not enough, you can expand EliMax’s features by stacking-up extension boards. USB3, WiFi, low and high resolution image sensors or stepper & brushless motor controller. Elios will support you in designing extenders for your specific application!

In brief, the EliMax features:

  • IntelPSG MAX10 FPGA with 50k Logic Elements
  • 2x64Mbit HyperRAM @200MBps
  • 6DoF Inertial Measurement Unit
  • 10/100 Ethernet phy
  • 2kbit E2PROM
  • 512Mbit QSPI flash
  • STM32F302 M3 core running @72MHz with FPU and DSP instructions
  • JTAG capabilities for FPGA and micro-controller
  • SHA-256 crypto engine
  • 4cm x 4cm form factor

Click on this link to download the EliMax brochure!

One Reply to “EliMax”

  1. […] more details and application use-cases, see here the direct link to the product or contact […]

Comments are closed.